KIMO's CT110 tachometer can measure RPM (using the optical mode) from 0 to 60,000 RPM. In the contact mode, it can measure in RPM, m/min, ft/min, in/min and m/s across a range from 0 to 20,000RPM.

There's also a HOLD function included on the CT110 (freezes the current display temporarily), the ability to display MAX/MIN values taken over a period of time and this tachometer also has a built-in backlight and configurable automatic shutdown.

KIMO CT110 Optical and Contact Tachometer

Dual capabilities - both a contact and a non-contact tachometer
Contact mode - uses a light beam from a diode which is reflected by a rotating mirror located inside the probe head. A light sensitive cell detects the frequency of the signal of the beam which is proportional to the rotation speed
Optical (non-contact) mode - a light beam is emitted from the diode of the probe and is reflected by a piece of reflective tape (included) on the measured elements. A light-sensitive cell detects the beam and translates it in frequency signal which is proportional to the tape rotation speed
Optical mode measures in RPM only with measurement range from 0 to 60,000RPM
Contact mode measures in RPM, m/min, ft/min, in/min or m/s with range from 0 to 20,000RPM
HOLD function freezes current values shown on the screen
Display the MAX/MIN measurements taken over a period of time
Configurable automatic shutoff
Backlit LCD screen

What's Included?